Rebound 25 Molding Silicone Spreadable for Vertical Surfaces

Rebound 25 Spreadable Molding Silicone for Vertical Surfaces  Rebound 25™; It is an easy-to-use, platinum-type silicone and, thanks to its self-thickening feature, it is ideal for making brushable molds on almost any model.

Mixing ratio is 1A:1B by volume (no scale required), Rebound™ can be easily applied to vertical surfaces with a brush or spatula without sagging and cures with very small shrinkage to become a flexible silicone.

General features

Rebound™ 25 is soft, flexible and ideal for molding models with deep cavities. Depending on the model configuration; Rebound™ 25 glove is reversible to receive patterns. Rebound™ 40, on the other hand, is stiffer and offers less flexibility. These products are compatible. For example, you can first apply two coats of Rebound ™ 25 and then supplement with two coats of Rebound ™ 40.

Mold Star® 15 is a material with a Shore hardness of 15A.

IMPORTANT: Even with a sealed coating, platinum silicones are not compatible with modeling clays containing heavy sulfur. If you are not sure that there is no sulfur in your clay; run a small-scale test to measure compatibility before using it in your project.

Technicial Specifications

• Özgül Ağırlık: 1,14 g/cc
• Specific Volume: 1.46m3/kg (23.5 cu. in./lb.)
• Mixture Life: 20 minutes
• Curing Time: 6 hours
• Shore A Sertliği: 25 A
• Tensile Strength: 27.57 Bar (400 psi)
• 100% Module: 3.792 Bar (55 psi)
• Die B Breaking Force: 102 ply
• Die B Breaking Force: 102 ply
• Mixing Ratio by Volume: 1A:1B
• Shrinkage: <,001 in. / in.
• Viscosity of the Mixture: Brushable