This website may not work properly in ie8 and in six versions. Please open your browser or a different version of the higher our website
General Features
Gelcoats protect composite products from light, moisture, solvent, etc. chemicals that protect against external influences. Brush Type Transparent Gelcoat; It is an orthophthalic polyester based transparent gelcoat and is suitable for use with a brush. It is preferred in the manufacture of many composite products in which polyester resin is used. It has high hydrolytic resistance and resistance to outdoor conditions.
It is used with a catalyst (MEK-Peroxide), the catalyst must be purchased separately.
Use
Safety- When working with gelcoat, work in a well-ventilated environment by taking your personal safety precautions. If necessary, wear a mask and always use suitable gloves (For example: DeltaPlus VENITACTYL 1400B100 Disposable Gloves). Wear eye protection goggles.
Recommended Catalyst Ratio (1% - 2%)- You should use "Catalyst" (MEK-Peroxide) with a minimum weight of 1 g and a maximum of 2 g for each 100 g of "Transparent Gelcoat". Since the dosage is precise, it is recommended to use a precision scale or kitchen scale to weigh the gelcoat. To add MEK-P into the gelcoat, you can easily use an injector or pasteur pipette from which you have removed the needle. Mix thoroughly for 2-3 minutes until the gelcoat and catalyst mixture is homogenized. After mixing, it is applied with a brush to the mold surface, on which a mold release agent has been applied before. Shelf Life - Do not expose the gelcoat to direct sunlight. Store in cool and ventilated environments in its own package. Under ideal conditions, the shelf life is at least 3 months.
IMPORTANT- The "Catalyst" (MEK-Peroxide) you will place with your Transparent Gelcoat orders is sent in accordance with the gelcoat. Please do not use ordinary catalysts. For best results, do not change the catalyst ratio The use of catalysts other than the specified ratios may cause too late/early gelling and curing problems!No chemicals other than catalyst are needed for the hardening of the gelcoat, it is in the accelerator of the gelcoat.
English
Türkçe 
